Concrete Resurfacing & Overlays in Gilroy CA - a new surface on a sound slab
Worn, pitted or patched concrete gets a fresh surface, once we've found and fixed whatever broke it down in the first place.
- Licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Can worn concrete get a new surface without tearing it out?
Concrete resurfacing and overlays in Gilroy, CA put a new layer over the slab you already have, so a scaled, pitted or patched surface looks and wears like fresh concrete without breaking out the old. We keep the slab's control and expansion joints, the cuts and gaps that let concrete move without cracking at random, in the new surface, because the slab underneath still needs room to move.
Most people call about a garage floor, patio or walkway that's flaking, stained or covered in mismatched patches, and they'd rather not pay to jackhammer it out. The price moves with the size of the slab, how much broken or failing concrete has to be repaired first, how much grinding and surface prep the old surface needs and the finish you pick. The schedule turns on those same repairs, and on an outdoor slab it also waits on dry weather and cure time. Your written estimate spells out each step, so you'll know what your slab needs before you decide anything.
How do you know your concrete is ready for resurfacing?
Flaking, scaling top layer
The top skin of the concrete peels off in thin flakes and leaves rough, sandy patches underneath. That usually means the surface was weak or worn down, and if you wait, the flaking spreads and the low spots start holding water.
Patches that don't match
Old repairs show up as gray blotches in different shades and textures across the slab. A new surface evens that out, but any patch that's loose or hollow-sounding has to come out first, or it'll take the overlay with it.
Cracks that keep widening
A crack that's wider this year than last tells you something underneath is still moving. A new surface alone won't stop that, and the longer you wait, the more water gets in and the bigger the repair before anything goes on top.
How we handle concrete resurfacing and overlays
A new surface won't fix the reason the old one failed, so on the first visit I look for why your concrete cracked or broke down, whether it's water, movement or an old finish that let go. We repair the broken and failing areas first, grind the old surface so the overlay has clean, open concrete to grab onto, then put the new surface down and finish it to the texture you chose. If your slab is still settling, I'll tell you before you spend anything, so you can decide whether it's worth doing now.
Some floors need a different fix. An indoor floor that dips or runs downhill is usually better served by self-leveling concrete and overlays, which flattens itself as it's poured, and the deck around a pool gets its own approach through pool deck coatings and resurfacing, since that surface lives wet and barefoot.
Thin skim coat
Suits a slab that's solid but tired, with surface wear, light pitting or stains. It's the lightest touch, because there's little to repair before the new layer goes on.
Repair and overlay
Suits a slab with broken edges, spalled spots or failed patches. We fix those areas first and then cover the whole slab, so the repairs don't show through as a patchwork.
Textured or stamped overlay
Suits patios, walkways and entries where looks and footing both matter. A broom, knockdown or stamped texture gives you grip underfoot and hides small imperfections better than a smooth finish.
Get a written estimate for resurfacing your slab
We respond within 1 business day to set up a visit. The estimate at your property is free, comes in writing with each step spelled out, and there's no obligation to go ahead.
- Based in
- Gilroy, CA 95020
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
What happens when you call about resurfacing your concrete?
Here's how a resurfacing job runs from your side, from the first call to the walk-through on the finished floor.
Call or send a message
Call (669) 205-6336 or use the form, and we'll get back to you to set a time to come out. Photos of the slab and a rough size help me know what to look for.
I look at the slab
I check the concrete, ask about old flooring and any damp spots, and walk you through your options. You get a written estimate with each step spelled out, so you can see the repair work apart from the new surface.
We repair, prep and resurface
Once you're ready, our own crew does the repairs, the grinding and the new surface. Either I or our lead installer is on site the whole time.
We walk the finished floor
Before we pack up, we walk the job with you so you can look it over and ask questions. Anything you want explained, we explain right there.
Why Gilroy homeowners call us to resurface concrete
The owner does your estimate
I come out myself, look at the slab and walk it with you. You hear what's going on with your concrete from the person who'll stand behind the job.
Our own crew does the work
The people on your slab work for us, with me or our lead installer there. That way the prep you were promised at the estimate is the prep that happens.
In business since 2013
I learned concrete floors working for an installer here in the valley before starting this business. Thirteen years on slabs teaches you to look underneath before anyone talks about color.
Licensed and insured in California
We're licensed and insured. That matters on this work, because California's license board sets out who can take on concrete jobs, which the questions below cover.
If you want to know whether your slab is ready for a new surface, send us a message or call (669) 205-6336 and I'll come take a look.
Resurfacing patios, garages and walkways around Gilroy
Getting a slab ready for an overlay means grinding the old surface, and Santa Clara Valley stormwater guidance says the residue from saw cutting, coring and grinding is picked up with a vacuum. That keeps concrete dust out of the gutter and the storm drain, and we clean up as we go so it doesn't get tracked into your house.
We're based in Gilroy and take jobs up and down the valley and over toward the coast. The calls look a lot alike from one city to the next. Older garage floors carry years of patches and oil, patios have scaled from sun and sprinklers, and walkways have cracked where tree roots or soft ground pushed them around. We see the same mix of slabs on jobs in Morgan Hill and Hollister, and the approach doesn't change. We find the cause first, then decide what the slab can carry.
Questions about concrete resurfacing in Gilroy
Can a cracked or settled concrete slab be resurfaced in Gilroy?
Usually yes, once the damaged concrete is repaired, but no one can completely stop cracks from coming back up through a new surface. That risk is highest when the slab is still settling or doesn't have enough control joints. It's why the first visit looks for what's causing the damage, so you can decide whether a new surface is worth it on your slab.
How much does concrete resurfacing cost per square foot?
Concrete resurfacing and overlays across the US usually cost about $3 to $20 per square foot, which is a national range and not a Gilroy price. Where your slab lands depends on how much repair it needs first, how much prep the old surface takes and the finish you pick. Your written estimate spells out each step, and the work is backed by our satisfaction guarantee.
Who is allowed to do concrete work in California?
California's state license board defines a concrete contractor as one who forms, pours, places, finishes and installs flat and other concrete work. A general building contractor can take on specialty work like this only if it holds that specialty classification or subcontracts it to an appropriately licensed specialty contractor. If a general contractor bids your resurfacing, it's fair to ask which of those applies.
When is the best time to resurface concrete in Gilroy?
During a dry stretch, with enough time for the new surface to cure before rain. Santa Clara Valley stormwater guidance recommends scheduling concrete work in dry weather and leaving time to cure before it rains. A garage or other indoor slab is less tied to the forecast, and we'll talk timing for your job at the estimate.
What causes a concrete overlay to peel or fail?
Most failures come from what's underneath or from how the material went down. For hand-applied repairs, success depends on good surface preparation, application technique, curing and the material chosen. Moisture, old finishes and rushed prep cause most of the trouble I see, which is why we don't hurry the grinding.
How do I fix small chips without resurfacing the whole slab?
Small chips and shallow damage can often be fixed with a hand-applied repair mortar instead of a full overlay. Those mortars replace damaged concrete and are generally recommended for thin repairs that are mostly cosmetic. If the rest of your slab is sound, a repair may be all it needs, and I'll tell you so.
Related services for uneven floors and pool decks
Self-Leveling Concrete & Overlays
If your floor dips or slopes indoors, a self-leveling pour flattens it out before flooring or a coating goes down, so nothing rocks or puddles.
Pool Deck Coatings & Resurfacing
A pool deck takes sun, splashing and bare feet, so its surface and grip matter more than a patio's, and we treat it as its own job.
Cities where we resurface concrete
Gilroy Epoxy Floors & Concrete Coatings is based in Gilroy, CA. The 12 cities below each have their own page on our site, from Santa Clara to Watsonville. If your city isn't named here, call and ask.
Send us photos of your slab
A few photos and a rough size let me see whether you're looking at a resurfacing job or a repair job before I drive out.