Flooring Contractor in Santa Clara - Coatings Built on Careful Slab Prep
Gilroy Epoxy Floors & Concrete Coatings is a flooring contractor serving Santa Clara. We coat, polish, seal and resurface concrete floors in garages, basements, pool decks and the shops and warehouses that work a floor hard.
- Licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Santa Clara floors we see on our jobs
Most of the Santa Clara homes we work on are single-story ranch and tract houses with an attached garage on a concrete slab. Mixed in are newer townhomes and condos with shared garages, plus offices, labs and light industrial buildings whose floors carry carts, racking and foot traffic all day. We're a flooring contractor based in Gilroy, CA, and we do the same kind of work nearby in Milpitas and Cupertino.
Those older garages bring in most of our calls. Their slabs have usually seen decades of oil drips, paint, sealers and patch jobs, and many were poured without a plastic sheet under the concrete to slow moisture from the ground, so what's happening underneath decides a lot about which floor will hold.
Floor services we offer in Santa Clara
Epoxy Floor Coatings
A tough, easy-to-clean coat for the older attached garages here, where we grind off years of oil and old paint first so the epoxy bonds to bare concrete.
Commercial & Industrial Epoxy Floor Coatings
For Santa Clara offices, labs, shops and warehouses where carts, forklifts and spills wear a floor fast, with a system picked for the traffic each area really gets.
Garage Floor Coatings
Turns a stained garage slab into a floor you can hose off, with flake or solid color, whether it holds cars, a workbench or a home gym.
Polyaspartic Floor Coatings
A faster-curing coating that holds its color in sun, which suits garages with doors left open to the driveway and homeowners who can't spare the garage for long.
Metallic Epoxy Flooring
A swirled, glossy finish people pick for converted garages, home offices and showrooms here, laid over a properly flat, clean slab so the pattern flows evenly.
Urethane Cement Flooring
For commercial kitchens, food plants and wash-down rooms in Santa Clara businesses, where hot water, cleaners and constantly wet floors would wear out an ordinary coating.
Polished Concrete Flooring
We grind and polish the slab itself to a sheen, a good fit for open-plan offices, retail floors and modern homes that want concrete left as concrete.
Stained Concrete Flooring
Puts color right into the concrete, which suits patios, entries and remodeled rooms where a thick coating would look out of place. A sealer goes on last.
Terrazzo Flooring
Chips of stone or glass set in a binder and ground smooth, for lobbies, entries and commercial spaces here that want a hard-wearing floor with real pattern.
Basement Flooring
Basements and below-grade rooms aren't common here, and the ones we see often fight damp coming through the slab, so we check for moisture before suggesting a floor.
Concrete Grinding & Surface Preparation
Grinding takes old paint, glue and sealer off older Santa Clara slabs and opens up the concrete, so whatever goes on next grips the slab instead of leftovers.
Concrete Sealing
A clear sealer for driveways, patios and garage floors that soak up oil and water now, so spills sit on the surface long enough to wipe up.
Concrete Resurfacing & Overlays
A thin new layer over worn, pitted or patched concrete on patios, walkways and garages, when the slab underneath is sound but the top has given out.
Self-Leveling Concrete & Overlays
Flattens dips and uneven spots in older slabs and remodels before a coating or new flooring goes down, so furniture sits level and water doesn't pool.
Pool Deck Coatings & Resurfacing
Recoats or resurfaces cracked, faded pool decks in Santa Clara backyards with a slip-resistant finish that's kinder to bare feet on a summer afternoon.
Concrete Floor Stripping & Removal
Takes up old tile, carpet glue, peeling epoxy and failed coatings, common in older homes and offices here, so the next floor starts on clean concrete.
Get a written floor estimate for your Santa Clara home or shop
We reply within one business day to set up a visit, and I come out to look at the slab myself. The estimate is free, written and comes with no obligation.
- Based in
- Gilroy, CA 95020
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
What to know before a floor job in Santa Clara
If your floor job needs a building permit, it comes from the City of Santa Clara's building division through its Permit Center, and applications go in electronically. The city requires a permit before you alter, repair or improve a building, but its list of examples names things like decks and sheds, not floor coatings, so whether your job needs one is a question for the Permit Center. When I'm not sure, I check with them before we start, and if a permit is needed, we pull it, set up the inspections and hold the work until it's issued. While you're comparing contractors, ask each one for a state license from the California Contractors State License Board and a Santa Clara business license, which the city requires even of businesses based outside it, like us. We're licensed and insured.
What moves the price is mostly what's under the surface, starting with how big the floor is, then how much old coating, glue or paint has to come off, how many cracks need filling, whether there's moisture to deal with and which system you pick. The schedule turns on the same things, plus a permit if your job needs one and the time a coating needs to cure before you walk or park on it, and the estimate I leave you puts your own figure on all of it. We come up 101 from Gilroy for jobs here, the same way we head down to Watsonville or over to Campbell, so expect a crew truck and a trailer of grinding gear in your driveway while we prep.
Why Santa Clara slabs need careful prep
Low, flat ground is a big part of why coatings fail here. The city says less than 10 percent of Santa Clara is in the mapped flood zone, but that many properties in and out of it are still at risk of flooding, because 35 percent of the city is protected by levees. On ground like that, a garage slab can draw moisture up from below, and moisture pushing up under epoxy is what makes it bubble and peel, so I look for damp spots before we talk about colors and pick a system that suits what your slab is doing.
Age and hard use do the rest. Older garages here have carried years of oil, paint and patching, many now double as workshops or gyms, and commercial floors take carts and forklifts every day. A coating can only grip what's under it, so on these floors we grind down to sound concrete first.
How a floor job runs when you call us in Santa Clara
From your first call to the final walk-through, here's what happens on your end and ours, and where you'll need to be there.
Call or send us a message
Tell us what the floor is, roughly how big it is and what's on it now, by phone at (669) 205-6336 or through the form. We get back to you to set a time for me to come look.
I walk the slab with you
I look at the floor with you there, ask about old flooring and any damp spots, and explain what I see before anyone picks a color. You get a written estimate with each step of the job spelled out, so you know what you're paying for before you decide.
Our crew preps and installs
Our own crew grinds, repairs and puts down the new surface, with me or our lead installer on site. If the job needs a permit, work starts once it's issued, and we set up the inspections along the way.
We walk the finished floor
Before we pack up, we go over the finished floor with you and point out what to keep off it while it cures. Every job is backed by our satisfaction guarantee.
Questions about floor coatings in Santa Clara
How much does it cost to epoxy a garage floor in Santa Clara?
The price comes down to your garage's size and how much work the slab needs before anything goes on it, so I give you a number after I've seen the floor. Grinding off an old coating, filling cracks or handling moisture adds to it, and a flake or metallic finish costs more than a plain solid color. A floor that only needs a light grind and a basic system is the lower end.
Does my flooring contractor need a California contractor license?
Yes, if the job needs a building permit, uses any workers, or the contracts add up to $1,000 or more in labor and materials. That cutoff was $500 until it was raised to $1,000, so older advice you read online may be out of date.
How long does a building permit stay valid in Santa Clara?
A Santa Clara building permit stays valid for 365 days from the day it's issued or from the last inspection it passed. If it runs out before the work is done, work can't start again until a new permit is issued, so on a job that needs one we keep the inspections moving instead of letting them pile up at the end.
Do I need a city permit for a dumpster on my street during a floor job in Santa Clara?
If a bin or POD has to sit in a City street, the city covers that with a Minor Encroachment Permit for temporary use. Most garage coatings don't call for a bin at all, but tearing out old tile or a thick failed coating can, and you'll know which kind of job yours is from the estimate.
Can you coat over cracks in a Santa Clara garage floor?
Yes, for most hairline and settled cracks, because we grind them open and fill them so the coating goes over a solid surface. A crack that's still moving will usually show back through any coating, and if yours looks like that, I'll say so before you spend money on it.
What is the best garage floor coating for a Santa Clara home?
For most garages here I'd go with a polyaspartic topcoat, because it holds up to sun through an open door without yellowing and you get the garage back sooner. Plain epoxy still makes a solid floor for a garage that stays shut and costs less, and either one is only as good as the prep under it.
Tell us about your Santa Clara floor
The sooner I see your slab, the sooner you'll know whether it's ready for a coating or needs work first, before you've picked a single color.