Polyaspartic Floor Coatings in Gilroy CA - a garage floor that stands up to sun
Garage floor peeling, fading near the door or bare and dusty? We fix the slab first, then lay a hard, fast-setting finish over it.
- Licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Is polyaspartic the right coating for your garage floor?
Polyaspartic floor coatings in Gilroy, CA are a hard, fast-setting finish we put over concrete, most often garage floors, so you get a surface that holds its color in the sun, sweeps clean and is back in use much sooner than epoxy.
Most people who call me have a garage floor that's peeling, stained or just bare, and they're trying to decide between this and epoxy. You're usually weighing downtime, lifespan and price, and the questions further down put numbers to each. What moves your price is the size of the floor, how much crack and divot repair it needs, whether an old coating has to come off first and the finish you pick. What moves the schedule is mostly the slab itself, because prep, repairs and any damp spots get sorted out before a drop of coating goes down. My written estimate spells out each step for your floor, and if you're still comparing finishes, our garage floor coatings page covers the other ways to do a garage.
How do you know your garage floor needs a new coating?
Coating lifting under tires
If your old coating is peeling in patches where the car sits, it usually means the prep underneath wasn't right or moisture is pushing up through the slab. The longer it stays, the more edges catch and lift, and that's more to strip off before a new floor can go down.
Yellowed finish near the door
Epoxy that's turned yellow or chalky where the sunlight hits it is telling you it wasn't built for that spot. It won't come back on its own, and recoating with the same product usually gets you the same result a few years later.
Cracks, pits and oil stains
Bare concrete with divots, hairline cracks and oil spots soaks up every spill and sheds dust onto whatever you store. Small cracks are easy to fill now and get harder to hide once they spread or their edges start to crumble.
How we install polyaspartic floor coatings
Polyaspartic sets fast, which gets your floor back sooner but leaves little room for mistakes, so our most experienced hands do this work. On the job we clear the space, clean the slab and fill the cracks, pits and divots so they don't telegraph through the finish, which is the trade's way of saying show up on top. Then we open up the surface so the coating has something to grip, lay the coats down while the material is still workable, and leave it to cure before anyone walks on it. It's our usual pick for a garage that sits with the door open and takes a lot of sun, because that's exactly where it earns its keep.
Polyaspartic isn't the answer for every floor, and I'll say so at the estimate. If you want a deep, swirled, poured look for a living space or showroom, metallic epoxy flooring gives you that, though it's best kept indoors away from direct sun. For a shop or food-prep room that sees hot washdowns, heavy loads and spills all day, urethane cement flooring is the tougher choice.
Decorative flake finish
Colored chips scattered into the wet coat suit most garages, because they hide dust, tire marks and small slab blemishes and add a little grip underfoot. It's the finish most people picture when they think of a coated garage.
Solid color coat
A single color with no chips suits a workshop or home gym where you want a plain, bright floor and can spot a dropped screw at a glance. It shows scuffs more than flake does, so it fits best where a clean look matters more than hiding wear.
Get a written estimate for your polyaspartic floor
Send the form and we'll get back to you within one business day to set up a visit. The estimate is free, done at your property, and there's no obligation to go ahead.
- Based in
- Gilroy, CA 95020
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
What happens after you call about a polyaspartic floor?
Here's how a job runs from your first call to the final walk-through, so you know who you'll see and what you'll have in hand before you decide.
Call or send a message
Call (669) 205-6336 or use the form, and we'll get in touch to set up a time for me to come see the floor.
I look at your slab
I check the concrete, ask about old flooring and any damp spots, and walk you through your options. You get a written estimate with each step of the job spelled out, so you can see what you'd be paying for before you commit to anything.
We prep and coat the floor
Our crew preps the slab, makes the repairs and puts the coating down in the order the estimate lays out. Keep the space clear until we tell you it's cured, since a fast-setting coat doesn't forgive footprints.
We walk the finished floor
Before we pack up, we walk the finished job with you so you can look at every corner and ask questions. That's also when I'll go over how to look after the floor from here.
Why Gilroy homeowners call us for polyaspartic floors
Started this business in Gilroy
I learned concrete floors working for an installer here in the valley and started this business in Gilroy in 2013. A coating that sets this fast punishes guesswork, so the years we've spent on slabs matter more on this job than most.
I walk your floor with you
I come out for the estimate myself, and our own crew does the work with me or our lead installer on site. The person who looked at your slab stays tied to the people coating it, so nothing gets lost between the estimate and the job.
Licensed and insured, with a guarantee
We're licensed and insured, which is worth asking any floor contractor about before they start. Our work is backed by our satisfaction guarantee.
When you're ready, send us a few details about your floor or call (669) 205-6336, and I'll come take a look.
Polyaspartic garage floors around Gilroy and who installs them
California's state license board describes a flooring contractor as one who prepares any surface for flooring and installs flooring materials other than ceramic tile, and a painting and decorating contractor as one who prepares surfaces and applies materials that adhere by evaporation to decorate, protect and waterproof a structure. A floor coating sits close to both of those lines, so when you compare bids, ask each contractor what license they carry and who will actually be on your floor while the coating goes down.
Around Gilroy, a lot of the garages we coat double as a workshop, gym or storage room with the door rolled up much of the day, so the floor takes sun, tracked-in dirt and dropped tools all at once. We also find plenty of older slabs carrying worn paint or sealer that has to come off before anything new will stick, and we see the same mix on jobs in Morgan Hill and Hollister.
Questions about polyaspartic floors in Gilroy
How much does polyaspartic floor coating cost per square foot in Gilroy?
Polyaspartic floor coating usually runs about $5 to $12 per square foot across the US, including materials and professional installation, according to national cost guides. That's a market figure, not our price, and some contractors come in lower by mixing epoxy and polyaspartic layers, which one guide says may not perform as well as an all-polyaspartic system. Your written estimate spells out each step for your own floor.
How long does polyaspartic take to cure before I can park on it?
Most polyaspartic coatings are dry to the touch within a few hours, and full cure for heavy vehicle traffic typically comes within 24 to 48 hours, according to one cost guide. So plan to park somewhere else for a day or two, where the same guide puts epoxy at up to a week. I'll tell you on the walk-through when your floor is ready for the car.
How long does a polyaspartic garage floor last compared with epoxy?
A professionally installed polyaspartic or polyurea system lasts 10 to 20 years or more with little maintenance, according to one national guide, against 5 to 10 years for most epoxy systems. The same guide says DIY epoxy kits often peel within 1 to 3 years. Those are national figures, and how long yours lasts still comes down to what's under it.
Will polyaspartic work on concrete with moisture coming through?
Not reliably, because one coating maker's guide says concrete without an effective moisture vapor barrier can let moisture through and cause the coating to blister and fail. That guide makes vapor testing the installer's job before coating, so ask anyone you're considering how they'll check your slab. I ask about damp spots at the estimate, and if your slab isn't ready for a coating yet, I'll tell you.
Is polyaspartic or epoxy better for a garage that gets a lot of sun?
Polyaspartic is the better pick for a sunny garage, because one cost guide rates how well it stands up to sunlight as excellent, against poor to fair for epoxy. That's the reason behind our usual pick for open-door garages above. Epoxy still makes good sense indoors, out of the sun.
What is the best way to prep concrete for a polyaspartic coating?
Grinding or blasting the surface is the way to go, since one coating maker's guide calls for shotblasting, which roughens the concrete with tiny steel beads, or diamond grinding rather than acid etching. Ask any crew you're considering which method they'll use on your floor. Our concrete grinding and surface preparation page explains the prep side in more detail.
Related floor systems to compare with polyaspartic
Metallic Epoxy Flooring
For an indoor room, studio or showroom where you want a floor with depth and movement, a poured metallic finish makes plain concrete the room's centerpiece.
Urethane Cement Flooring
When a floor has to take hot water, forklifts, grease and constant washing, a urethane cement system holds up where thinner coatings would wear through or let go.
Service areas around Gilroy for floor coatings
Gilroy Epoxy Floors & Concrete Coatings is based in Gilroy, CA, and the 12 cities below each have their own page, from San Martin to Campbell. We take jobs up and down the valley and over toward the coast, so if your city isn't listed, call and ask.
Get your polyaspartic floor estimate started
Have your floor's rough square footage, its condition and any cracks or old coating in mind when you call, and we can plan the visit around what your slab needs.