Flooring Contractor in Morgan Hill, CA - Garage and Shop Floors Built on Good Prep
Gilroy Epoxy Floors & Concrete Coatings is a flooring contractor based in Gilroy, coating, polishing and resurfacing concrete floors in Morgan Hill garages, basements, pool decks, shops and warehouses, starting with prep that keeps the coating stuck down.
- Licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Morgan Hill garages and shops, just up the valley
Morgan Hill sits about 10 miles north of us in Gilroy, in the narrow southern end of the Santa Clara Valley, with San Martin in between. It's one of the closest cities we work in, and the calls from here look a lot like the ones from home.
Homeowners here mostly call about garages and pool decks, and shop and warehouse owners call about floors that take carts, pallets and spills all day. The houses range from older places with slabs that have seen decades of oil, paint and patching to newer homes where the builder's sealer is still on the concrete. Either way, what's already on the slab decides the prep, and the prep decides whether the new floor stays put.
Floor services we offer in Morgan Hill
Epoxy Floor Coatings
Good for a Morgan Hill garage or hobby room floor that sheds dust and soaks up stains, once we've ground the slab so the epoxy can grab hold.
Commercial & Industrial Epoxy Floor Coatings
For shops, small warehouses and light industrial spaces here where pallet jacks, carts and spills chew up bare concrete, we build thicker systems meant to take that traffic.
Garage Floor Coatings
Most Morgan Hill calls start in the garage, with oil spots, hot-tire marks or a peeling DIY kit we grind off before the new coating goes down.
Polyaspartic Floor Coatings
When you want the garage back in use quickly, polyaspartic is the faster-curing choice, and it pairs well over an epoxy base on Morgan Hill garage slabs.
Metallic Epoxy Flooring
A swirled, glossy finish for a home gym, game room or small showroom in Morgan Hill, worked by hand so no two floors come out quite the same.
Urethane Cement Flooring
For commercial kitchens, food plants and wash-down rooms in Morgan Hill that see hot water and strong cleaners daily, this handles heat and moisture better than plain epoxy.
Polished Concrete Flooring
We grind and polish the slab itself for shops, offices and modern homes here that want a hard, low-upkeep floor with no coating to wear through.
Stained Concrete Flooring
Acid or water-based stain gives a plain Morgan Hill patio, basement or living area slab some color without covering the concrete's natural marks.
Terrazzo Flooring
For an entry, lobby or commercial space in Morgan Hill that's meant to last decades, terrazzo sets stone or glass chips in a binder we grind smooth.
Basement Flooring
Below-grade floors often pick up moisture from the ground, so we test a Morgan Hill basement slab before choosing a coating that can live with it.
Concrete Grinding & Surface Preparation
Diamond grinding takes off old paint, glue and sealer and opens up the concrete, which is where most of our Morgan Hill coating jobs start.
Concrete Sealing
A penetrating or film-forming sealer helps keep oil, water and stains out of a Morgan Hill driveway, patio or garage slab that isn't getting a full coating.
Concrete Resurfacing & Overlays
When a Morgan Hill patio or garage slab is worn, pitted or patched but still sound, a thin overlay gives it a new face without tearing it out.
Self-Leveling Concrete & Overlays
Uneven Morgan Hill slabs from old remodels or settling get a pourable underlayment that finds its own level, so tile, vinyl or a coating can go down flat.
Pool Deck Coatings & Resurfacing
Pool decks here take chlorinated water, bare feet and patio furniture, so we strip failing coatings and lay down a textured surface with better grip when wet.
Concrete Floor Stripping & Removal
Before anything new goes down, we take up old carpet glue, vinyl tile, peeling epoxy or tile mortar so your Morgan Hill slab starts clean.
Get a written estimate for your Morgan Hill floor
Send the form and we'll get back to you within one business day to set up a visit. I'll look at your slab in person, and the written estimate is free with no obligation.
- Based in
- Gilroy, CA 95020
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
What working in Morgan Hill means for your floor
Building permits in Morgan Hill come from the city's Building Division, which issues them for alterations, repairs and changes in use of existing buildings, so whether your floor job needs one is the city's call, not ours. When I'm not sure, I check with the city before work starts, and if it needs a permit, we pull it and set up the inspections. That puts the city's review ahead of our start date, which is why I'd rather sort it out at the estimate than the morning the grinders show up. We're licensed and insured.
The price mostly comes down to the floor itself, its size, what's on it now and how much crack repair it needs, plus the system you pick, and the written estimate spells out each step so you can see where your money goes. The schedule turns on the prep, how dry the slab tests and how long your coating needs before you walk or park on it, and for a shop or small warehouse in town we plan the grinding and coats around when you need the floor back. It's the same way we run jobs in Hollister and the other cities up and down the valley.
Morgan Hill concrete and what wears it down
A lot of garage slabs here are either bare concrete or carry a coating someone rolled on years ago. Bare concrete soaks up oil like a sponge and gets dusty as the top wears, and an old rolled-on kit tends to come up in patches, so we usually start by grinding back to clean concrete. Moisture coming up from the ground is the other thing I look for, because a coating on a damp slab is like paint on a wet wall, and if your slab isn't ready, I'll tell you before you spend money on it.
Pool decks and business floors wear for different reasons. A deck takes pool water, chemicals and bare feet until the old coating flakes, and a shop floor takes carts, dropped tools and spills, so for both we strip what's failing and match the new surface to what the floor actually has to put up with.
How a floor job runs when you call us in Morgan Hill
Here's how a Morgan Hill floor job goes from your first call to the final walk-through, so you know who shows up and when you'll have a written price.
You call or send a message
Use the phone or the form, tell us a little about the floor, and we call you back to set a time for me to come see it. Photos help, but you don't need them.
I come look at your slab
I check the concrete, ask about old flooring and any damp spots, and walk you through the options that suit it, so it helps if you're home to see what I'm seeing. You get a written estimate with each step spelled out before you spend anything.
Our crew preps and coats
Our own crew does the work, with me or our lead installer on site, starting with the prep and then putting the new surface down. You don't need to be home the whole time, but we'll need the garage or room cleared before we start.
We walk the finished floor
Before we pack up, we walk the floor with you, go over how to treat it in the first days of use and answer your questions. Every job is backed by our satisfaction guarantee.
Flooring contractor questions from Morgan Hill
Who do I call in Morgan Hill to find out if my floor project needs a permit?
Call the city's building office at 408-778-6480, which the city names as the best contact when an owner isn't sure. The city's list of work that needs no permit covers things like small sheds, fences and low decks within set size limits, and that page isn't dated, so a phone call is the surer check. On our jobs, I make that check before we start so you don't have to.
What building codes apply to a permit in Morgan Hill?
Permit applications in Morgan Hill have to meet the current California Building Standards Codes, the state's building rules, as the city has adopted and changed them in its own law. So a permitted project here is checked against the state rules plus the city's local changes. When a job of ours needs a permit, we set up the inspections and work to what the permit calls for.
How do I apply for a flooring permit in Morgan Hill?
If your floor job needs a permit, the application goes to the city by email at permits@morganhill.ca.gov, because the online system on the city's building page only takes contractor-filed residential reroofs, repipes, water heaters and certain solar permits. When one of our jobs needs a permit, we pull it and set up the inspections, so you won't be filing it yourself.
How much does an epoxy garage floor cost in Morgan Hill?
I can't give you a fair number until I've seen the slab, because the floor's condition moves the price more than anything else. Old paint or sealer to strip, cracks and pits to fill, and moisture coming up through the concrete all add work, and so does stepping up from a flake epoxy to a metallic finish or a polyaspartic topcoat. Call (669) 205-6336 and I'll come out and put it in writing, step by step.
What causes epoxy to peel off garage floors in Morgan Hill?
Most peeling starts under the coating, with moisture coming up through the slab, an old sealer or paint left in place, or concrete that was never ground. Epoxy holds by gripping the surface, a bit like tape on a dusty shelf, so a slick or damp slab lets go, usually first where hot tires sit. That's why we grind, test for moisture and strip old finishes before anything goes down.
Is polyaspartic or epoxy better for a garage floor in Morgan Hill?
For most garages I lean toward an epoxy base with a polyaspartic topcoat, because you get epoxy's thick, forgiving build under a top layer that holds its color better in daylight. A full polyaspartic system goes down faster, but it leaves less working time, so the prep has to be right. I make the call after I've tested your slab, not before.
Get your Morgan Hill floor looked at
Call (669) 205-6336 or send the form, because one look at your slab tells me more than any photo and tells you whether it's ready for a coating before you spend anything.