Flooring Contractor in Salinas, CA - Coatings That Start With a Ready Slab
Gilroy Epoxy Floors & Concrete Coatings is a flooring contractor based in Gilroy that coats, polishes and repairs concrete floors in Salinas, from home garages and pool decks to shop and warehouse floors.
- Licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Salinas garages, shops and slabs we work on
Salinas is a working city, and the floors we get called to here show it. There are older single-story houses with attached garages that have soaked up years of oil and paint, newer subdivisions where the garage slab is still bare, and plenty of shops, warehouses and equipment buildings tied to the farms in the valley that need a floor built to take forklifts and tracked-in dirt.
We're a flooring contractor in Gilroy, CA, and we take the same kinds of calls in Prunedale just up the road. Whatever the building, the job is shaped by what's already on the slab. An older house usually means paint, sealer or carpet glue to grind off first, while a newer slab may be clean but too smooth for a coating to grab until we open it up.
Floor services we offer in Salinas
Epoxy Floor Coatings
Fits Salinas garages and laundry rooms where oil and muddy boots hit bare concrete, since an epoxy surface wipes clean instead of soaking everything in.
Commercial & Industrial Epoxy Floor Coatings
Built for warehouses, packing sheds and equipment shops around Salinas where forklifts, pallet jacks and spilled fluids would chew through plain concrete or thin floor paint.
Garage Floor Coatings
For the attached garages on older Salinas houses, where years of oil spots and peeling paint have to come off before any new coating will stay put.
Polyaspartic Floor Coatings
When you can't give up your Salinas garage or shop for long, this coating cures faster than standard epoxy, so you're parking or working on it sooner.
Metallic Epoxy Flooring
For a Salinas living room, showroom or home bar where you want a floor with depth and movement, poured over concrete that's been ground flat and clean first.
Urethane Cement Flooring
The floor we point to for food processing rooms and wash-down areas in Salinas, where hot water, cleaners and constant moisture would make a regular epoxy let go.
Polished Concrete Flooring
Suits Salinas shops, offices and newer homes with a sound slab, since we polish the concrete itself rather than add a layer that wears off.
Stained Concrete Flooring
For patios, entries and bare indoor slabs in Salinas that just need color, because stain soaks into the concrete and leaves its natural marks showing through.
Terrazzo Flooring
For Salinas lobbies, storefronts and entries that see foot traffic every day and need a floor that looks good for a long time with simple cleaning.
Basement Flooring
Not many Salinas houses have basements, but for those that do, we check the slab for damp first and pick a floor that can handle it.
Concrete Grinding & Surface Preparation
The step under every coating we lay in Salinas. We grind off old paint, sealer and glue so the new floor bonds to clean, open concrete.
Concrete Sealing
For driveways, patios and bare garage slabs in Salinas that are fine as they are but soak up oil and stains, a clear sealer slows that down.
Concrete Resurfacing & Overlays
When an older Salinas patio, walkway or slab is worn, pitted or patched but still solid underneath, an overlay gives it a new surface without tearing it out.
Self-Leveling Concrete & Overlays
For Salinas floors that dip, slope or step between old additions, a self-leveling layer flattens the slab so tile, wood or a coating sits even.
Pool Deck Coatings & Resurfacing
For Salinas backyard pool decks that have gone rough, cracked or stained, a new textured coating gives bare feet better grip and a cleaner look.
Concrete Floor Stripping & Removal
When a Salinas floor still carries old tile, glue, vinyl or a failing coating, we strip it to bare concrete before anything new goes on.
Get a free written floor estimate in Salinas
Send the form and we'll get back to you within one business day to set up a visit. I come out, look at your slab and leave you a written estimate, free and with no obligation.
- Based in
- Gilroy, CA 95020
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
What to know before a floor job in Salinas
Permits in Salinas come from the city's Community Development office, which takes applications and books inspections online, so if your floor job needs one, the work waits until it's issued. When a job needs a permit, we pull it and set up the inspections, and when I'm not sure whether it does, we check with the city before anyone starts. Contractors in California are licensed by the Contractors State License Board, and we're licensed and insured.
Salinas is an easy drive down 101 from our base in Gilroy, so the drive isn't what moves the price. The slab is. Cost and schedule turn mostly on how much old paint, glue or sealer has to come off, how many cracks need filling, whether moisture is coming up through the concrete, how big the floor is, which coating you pick and how long it needs to cure before you use it. It's the same list I work through up in Santa Clara, and you get your own figure in writing once I've seen the floor.
Salinas slabs and what wears them down
A lot of the concrete here works hard. Garages double as workshops, and shops and warehouses tied to the farms see oil, fertilizer, cleaners and soil tracked in every day, all of which bare concrete drinks up and holds onto. We match the coating to the use, so a home garage gets a different system than a floor that takes forklifts or daily wash-downs.
The city keeps a flood hazard map drawn from FEMA's national flood layer, and if your property sits in or near a mapped zone, water under the slab deserves a hard look. Moisture pushing up from below is behind most of the coatings I see lifting, so I check for it before we choose a product.
How a floor job runs when you call us in Salinas
Here's how it goes from your first call to the final walk-through, so you know who you'll talk to and what you'll have in hand at each point.
Call or send a message
Call (669) 205-6336 or use the form, and we get back to you to set a time for me to come out. Pick a time you can be home, because I'll want to walk the floor with you.
I look at your slab
I check for damp spots and cracks, ask what's been on the floor before, and go through your options with you. You get a written estimate with each step of the job spelled out, so you know what you'd be paying for before you decide anything.
Our crew preps and coats
Our own crew grinds, repairs and lays the new surface, with me or our lead installer on site the whole time. You don't need to be home for all of it, but the floor stays off-limits until it's cured.
Walk the finished floor together
Before we pack up, we walk the finished job with you and go over how to care for it. That's also your chance to ask anything about the first days of use.
Salinas flooring contractor questions, answered
Where do I apply for a building permit in Salinas?
You apply through the city's online permit site. Create a public account first, because you'll need it before you can pay fees, then use Apply for Permits.
Can someone without a contractor's license coat my garage floor in Salinas?
Only on a small job, and only under narrow conditions. California's minor work exemption, now $1,000, up from $500, applies only when the work needs no permit and the unlicensed person has no one working for them on the project. Past that, the job calls for a licensed contractor.
Who can haul away old flooring and concrete debris in Salinas?
In Salinas, only the city's franchised hauler may collect and haul construction debris, and whoever produces it has to contract with that hauler unless an exception applies. One exception covers debris a licensed contractor removes as part of its own job, though a debris box doesn't count. The old coating, glue and grinding dust we take up leaves with our crew.
How much does an epoxy garage floor cost in Salinas?
There's no honest number until I've seen your slab, because prep usually decides the price more than the coating does. A newer bare slab costs less to get ready than an older one with paint, glue or oil soaked in, and a full flake or metallic finish or a faster-curing polyaspartic topcoat adds to it compared with a plain solid color. The written estimate gives you your own figure.
What is the best way to prep a Salinas garage floor for epoxy?
Grinding is the best prep for most garage slabs, because it takes off old paint, sealer and oil-soaked concrete and leaves an open surface the coating can grip. Before that, I look for moisture and cracks, since grinding a damp slab and coating it anyway just puts the problem off. If your slab isn't ready yet, I'll tell you.
How do I check permit records and contractors in Salinas?
The same city permit site lets you search permits, projects, properties and contractors, so you can look up past permit records for your address. Inspections are booked there too, which keeps applying, looking things up and scheduling in one place.
Plan your Salinas floor with us
Call (669) 205-6336 or send the form before you buy a coating kit, because a look at your slab first can save you from a floor that lifts.